G4 Auto-Steering kit
AUTOMATIC STEERING
Auto-Steering G4 Kit
The automatic steering solution for every model
of NOT-steer-ready tractor
It mounts on any existing steering wheel thanks to
the Patented universal ring gear MDU!
Auto-Steering Kit: the system
G7 Plus / G7 Iso / G12
The display of the system, sending commands to the ECU-S1.
ECU-S1
It detects orientation and movement of vehicle, receives GPS data and converts data from FARMNAVIGATOR display into steering commands.
MDU-G4
The Mechanical Drive Unit with universal ring gear steering the wheel. Two models: MDU-G4 and MDU-G5
Universal Mechanical Drive
Mounts on any existing steering wheel
The MDU mounts on existing steering wheel without requiring its removal thanks to the Patented universal ring gear. The MDU simply clamps on and off for fast and easy transfer across vehicles of different brands and types (tractors, sprayers, spreaders or combines).
You can disengage the auto-steering by firmly grasping the steering wheel; and you can engage it just by tapping the icon on the FARMNAVIGATOR display.
-
Patented universal ring gear
-
Easy to move from one vehicle to another
-
High torque gear for the most demanding vehicles
-
Silent and very fast, can steer in any type of land
Installation
Automatic set up and calibration
1. Connect the receiver (not included) to G7 / G12 via serial cable.
2. Connects the G7 / G12 to the ECU through the USB-VideoIN-Ethernet Cable.
3. Easily configure the ECU following the step-by-step wizard on the G7 / G12 display.
Installation Kits
Available MDU-G4 Installation kits:
-
MDU-G4 Bracket A (K10MDU001A)
-
MDU-G4 Bracket B (K10MDU002A)
-
It can be moved from one vehicle to another, using a MDU-G4 Switch Kit (K10AAMH001)
Check your compatibility first!
Download the compatibility list
Technical Specifications
FARMNAVIGATOR ECU-S1
| Operating Temperature -20° C to 60° C |
| Storage Temperature -40° C to 85° C |
| IP-67 Humidity 95% non-condensing |
| Certifications: FCC, Industry Canada, RoHS, CE, C-Tick |
| Input Voltage 9-16 VDC |
| Dimensions 153 mm x 147 mm x 57 mm |
| Weight <1kg |
| Connectors: 18-pin Male (power, display & GPS), 30-pin Male (for vehicle interface) |
| Ethernet connection to display |
| CAN Ports to Connect to ISOBUS Steering controller |
| Wheel Angle Sensor input |
| Pressure transducer input |
| 9-axis inertial sensors to provide enhanced terrain compensation |
| RTK compatible ( connecting RTK antenna directly to ECU) |
| LED indicators |
| Included connection cables: cable harness (ethernet, power, NMEA-A, NMEA-B, Expansion, CAN); ECU-MDU cable. |
Included Accessories
 |
 |
 |
|
MDU-G4 Motor and Main Cable KAASS00015 |
Assy Gear for MDU-G4 KAASS00013 |
MDU-G4 Installation Kit CASE / NH / PUMA T6 T7 T8 KAAARKC001 |
|
 |
 |
|
ECU-S1 |
ECU-S1 Harness Main Cable KAAACBC002 |
ECU-S1 Power Cable |
|
|
Support
Support
 |
Support |
PRODUCT CATALOG 2023
 |
Intelligent Agriculture for farms of all sizes.
|
Farmnavigator Product line
